fuelgood PLUS unleaded
fuelgood PLUS unleaded contains a higher concentration of a fully synthetic multifunctional additive package which features a friction modifier. This modifier reduces deposit control and provides protection against corrosion, delivering enhanced power and performance for your vehicle’s engine so it can run “like new”.
The multipurpose fuel is based on a unique polyisobuteneamine additive which is combined with synthetic carrier fluids. This additive contains a very effective friction modifier, which reduces friction in your vehicle’s engine. This leads to increased performance of your engine and delivers greater power.
The additive contained in fuelgood PLUS unleaded efficiently controls and removes vehicle intake system deposits. Fewer deposits lead to continuous optimal combustion and the lowest possible emissions. Furthermore, the fully synthetic composition of the additive helps to control the formation of combustion chamber deposits, improving the efficiency of your engine.
In fuelgood PLUS unleaded, 5% Bioethanol is added which reduces Co2 emissions. fuelgood PLUS products contain additives which allow the engine to perform more efficiently therefore reducing HC, CO and NOx emissions.
Note – fuel consumption reduction with fuelgood PLUS fuel may vary depending on the frequency of vehicle servicing, ambient and driving conditions.
|Properties||Typical Value||Unit||Analysis Method|
|Density||720 – 772||g/l||EN ISO 3675|
|Vapour pressure, summer||69 – 3||KPa||EN 13016 – 1|
|Vapour pressure, winter||100||KPa||EN 13016 – 1|
|Sulphur Content||max 8.4||ppm||EN ISO 13032|
|Benzene content||max 1,00||% – vol||EN 238|
|Octane number RON||min 95||EN ISO 5164|